Author Topic: F4 steering  (Read 652 times)

incacola63

  • Cadet
  • *
  • Posts: 2
    • View Profile
F4 steering
« on: March 10, 2018, 02:13:02 PM »
Hi all. I'm having problems with rudder and aileron response. In the cockpit the pedals and the joystick move fine but the actual control surfaces do not move thus can not steer the plane on the ground and can not take off as it just stays on the ground....Am I missing something in the setup of the cockpit controls?

SiR R.i.P.P.E.R.

  • Administrator
  • Test pilot
  • *****
  • Posts: 1.139
    • View Profile
Re: F4 steering
« Reply #1 on: March 10, 2018, 03:26:10 PM »
Hello there!

This is an installation issue. Please refer to this topic for the solution: http://simworksstudios.com/forum/index.php?topic=755.0

incacola63

  • Cadet
  • *
  • Posts: 2
    • View Profile
Re: F4 steering
« Reply #2 on: March 11, 2018, 03:59:35 AM »
Thank you. This fix it. Was missing the XMLTools entry 

udidwht

  • Cadet
  • *
  • Posts: 4
    • View Profile
Re: F4 steering
« Reply #3 on: June 06, 2018, 07:18:17 AM »
With respect to the fix on the link. It says....Check if you have the following 2 entries.

Aren't those 3 entries showing in your example?

  *  <Launch.Addon>
        <Name>CarrierExtensions</Name>
        <Disabled>False</Disabled>
        <ManualLoad>False</ManualLoad>
        <Path>Gauges\CarrierExtensions.dll</Path>
      </Launch.Addon>
   * <Launch.Addon>
        <Name>XMLTools3D</Name>
        <Disabled>False</Disabled>
        <ManualLoad>False</ManualLoad>
        <Path>XMLTools3D.dll</Path>
        <DllStartName>module_init</DllStartName>
        <DllStopName>module_deinit</DllStopName>
      </Launch.Addon>
    *<Launch.Addon>
        <Name>SWS_ShipPlacer</Name>
        <Disabled>False</Disabled>
        <ManualLoad>False</ManualLoad>
        <Path>Gauges\SWS_ShipPlacer.dll</Path>
      </Launch.Addon>
Windows10Pro64bit/GigabyteGA-Z68XP-UD3/Corei5-2500K/G-Skill16GBDDR3CL7-8-8-24/AsusRX570Overclock4GBDDR5/SoundBlasterXfiXtrmeGamer/WD1TBSATA3/WD1TBSATA3/Hitachi1TBSATA3/LGBlueRayDL/Antec650wPSU/RosewillMidTowerChallenger

udidwht

  • Cadet
  • *
  • Posts: 4
    • View Profile
Re: F4 steering
« Reply #4 on: June 06, 2018, 07:52:48 AM »
Attempted an uninstall then reinstall. Windows 10 Pro 64bit. UAC is set to never notify (from clean install).

No success. Ran in admin 3 times.

Going to try manual method.
Windows10Pro64bit/GigabyteGA-Z68XP-UD3/Corei5-2500K/G-Skill16GBDDR3CL7-8-8-24/AsusRX570Overclock4GBDDR5/SoundBlasterXfiXtrmeGamer/WD1TBSATA3/WD1TBSATA3/Hitachi1TBSATA3/LGBlueRayDL/Antec650wPSU/RosewillMidTowerChallenger

udidwht

  • Cadet
  • *
  • Posts: 4
    • View Profile
Re: F4 steering
« Reply #5 on: June 06, 2018, 08:11:36 AM »
Manually adding the XML  entries worked.
Windows10Pro64bit/GigabyteGA-Z68XP-UD3/Corei5-2500K/G-Skill16GBDDR3CL7-8-8-24/AsusRX570Overclock4GBDDR5/SoundBlasterXfiXtrmeGamer/WD1TBSATA3/WD1TBSATA3/Hitachi1TBSATA3/LGBlueRayDL/Antec650wPSU/RosewillMidTowerChallenger